*Get FREE real solar installation cost online.
California Zip Codes Only.
The “Zip Code” used to match local solar radiance. (By default, we use DT LA CA NREL solar radiance database).
We will notify if there are utility rebates for residential solar panels installation and analyze your solar savings based on your utility rates.
Did you get solar bids? Tired of getting different solar panels quotas? Confuse with solar power system cost or solar savings numbers? This option allows you to select the number of solar panels, type of solar panels, and inverter. All you should do is to select this option and our system will tell you what is the actual solar sizing, and the solar price you have to pay.
Solar Price Discovery Inc solar energy specialist will review your bills and will send solar estimate to your email. Utility bill required.
Based on solar system components preference; Site evaluation & True energy usage (Optional) – Get solar estimate NOW!
Customers need to be aware that in most cases are changing during the seasons, not only because their energy demand profile is changing but also because the most of the utility companies are charging you differently between the seasons per year. For accurate savings analysis, we are recommended to check the box “Customize your average monthly utility bills (Optional)”.
You can Fill in the blank your latest ELECTRIC USAGE (kWh) and ELECTRIC PAYMENT ($) to calculate your actual electrical payments or you can fill up to 12 month electrical bills for better results. (The order does not matter). The important results here will be your actual Pre-Solar cost per kWh. We will use it to analyze your potential PV savings.
Design your solar system, Select your solar panels and solar inverter preferences from a list and roof performance – Get solar power estimate now!
Changing the following parameters will effect the results above!
Don’t Worry! SOLAR PRICE DISCOVERY specialist will review and revise (if needed) for your convenience.
You can get assistance by checking the box “How to find my longest roof pitch azimuth?” and following the Instructions.
Shading Estimate caused by buildings or trees. This option will let include the potential solar energy production losses cause by shading. This is an estimate only. Our specialist will determine the actual shading effects for you, based on solar location on your roof.
The total electric appliances shouldn’t increase the total Ampere of your main service panel, including the total amps required for installing solar Panels. Select the option “Let’s do it together“, Or select “Not sure” and we’ll calculate it at site evaluation.
Your total electric devices shouldn’t increase the total Amp of the main panel. The total Amp is printed near or on the Main Breaker at the upper level of your electric panel. You can determine your total Amp here.
(A Solar panels designed to absorb the sun’s rays for generating electricity)
Select your preferred PV solar panel brand or model. You can watch solar manufacturer introduction video, review panel specification and warranties.
(Solar Inverter converts the direct current – DC output of a solar panel into an alternating current – AC)
Select your preferred inverter. You can watch manufacture introduction video, read the specification and warranties for each of them.
You can select one of the following inverters:
Solar performance Tracking App to your smart phone or computer.
Solar price Discovery Inc. will monitor your system and check for maintenance requirements.
Our energy storage solution (ESS) supported application are:
Supported calculator available here: Battery Sizing Tool, Solar Panels Sizer Tool – Load calculator Tool.
LG: CHANGE YOUR ENERGY CHARGE YOUR LIFE. Source: lgchem.com
Enphase: A smart battery meets powerful software. Source: enphase.com
Solar Price Discovery Inc holds variety of storage battery manufacturer. Therefore we are recommending on DC coupling integration of LG and StorEdge inverter to maximize efficiency.
Pre-Solar Price: “Blended electric price $/kWh” is: Blended “Electric price $/kWh” is the amount of your total bill payments divided by the total kilowatt-hours consumed.
Post-Solar Price: “Post-Solar Cost” & Levelized Cost of Electricity (LCOE), is the net cost of the solar system divided by the sum of electrical energy generating over the lifespan, under a net energy metering agreement (NEM 1.0) credits at full retail rates.
30YR Energy Savings: “Performance” = Potential Induced Degradation (PID) is a potential induced performance degradation in crystalline solar Photo-Voltaic (PV) modules, caused by stray currents.
Assuming average nominal Price escalation rate (1972-2016) of 4%. Source: U.S. Energy Information Administration (EIA).
ROI: Solar investment – Return on Investment is equal to (ROI).
System Size: Grid tied solar panels measured by “Standard Test Conditions” (STC) are the industry standard for the conditions under which a solar panel are tested.
The direct current (DC) is the unidirectional flow of electric generated from solar cells.
Panels: Solar panel designed to absorb the sun’s rays for generating electricity.
Inverter: Solar Inverter converts the direct current – DC output of a solar panel into an alternating current – AC.
Annual Usage: Total energy (kWh-AC) the customer have been used in the last 12 months, based on customer input.
Annual Generate: Estimate solar energy (kWh) generation in solar real-world conditions at 1st YR. Refer to the California Energy Commission (CEC) Standards.
Covered by Solar: Excepted photostatic (PV) solar system energy (kWh) coverage.
Note: Some utilities will allow customers to size a solar system up to customer previous 12 months’ electrical usage.
Payback Period: Payback Period is the period required to cover the “Price” of the solar project.
Price: The total project cost will be charged by SOLAR PRICE DISCOVERY INC.
Note: (Permit, tax, labor and materials are included)
Federal Tax Credit (ITC): A tax credit is a dollar-for-dollar reduction in the amount of income tax you would otherwise owe (IRS Form 5659). If the federal tax credit exceeds tax liability, the excess amount may be carried forward to the succeeding taxable year.
In case of utility rebate the “Federal Tax Credit” is subtracted from your system costs before we calculate your tax credit.
Estimate Rebate: Utility solar rebate are not guarantee and may be vary than indicated.
Net Price: Is the project net solar panels price deducted by 30% “Federal Tax Credit” (ITC) and “Estimate Rebate” (If any).
Solar Panel: The solar panel absorb sun’s sun rays as a source of energy for generating electricity.
Photovoltaics (PV): is way of producing electrical power by converting solar radiation into direct current electricity using semiconductors.
Inverter: Inverter converts the electricity from your solar panels (DC, or direct current) into electricity that can be used in your house (AC, or alternating current).
String (Central) Inverter: Is a device used to modifies the direct current (DC) output of a photovoltaic (PV) solar panels into a utility frequency alternating current (AC)
Micro Inverter: Is a device used to converts direct current (DC) generated by a single solar module to alternating current (AC).
Optimizer: A power optimizer is a DC to DC converter device developed to maximize the energy harvest from solar photovoltaic.
DC Rating (kW STC): This is the calculated total DC STC (Standard Test Conditions) rated capacity of the PV modules and is measured by multiplying the STC module rating by the number of panels. This capability is utilized as an input to PV Watts to determine the performance of the system.
DC Rating (kW PTC): It is the measured total DC PTC (PVUSA Test Condition) rated capacity of the PV modules and is measured by multiplying the PTC module rating by the number of panels. This capability is used to calculate the CEC (California Energy Commission)-AC rating of the system.
CEC-AC Rating: This is the device of the PV module PTC rating, module and inverter efficiency. It can also be used in the solar system Rebates calculation.
AC (EFF): The AC-Efficiency of the PV solar System, combined with latitude and climate, measures the energy output of the system.
Geographic Location: Provide monthly average and annual average photovoltaic (PV) solar resource, averaged over surface cells of 0.1 degrees in both latitude and longitude.
Array Tilt (degrees): This is the proposed system tilt from horizontal. Flat (horizontal) systems have a 0º tilt.
Array Azimuth (degrees): This is the horizontal direction (“true” north-south) the suggested system is pointing; due South is 0º azimuth.
True South: True south is the direction towards the southern end of the axis about which the earth rotates, called the South Pole. (Magnetic south is the direction towards the south magnetic pole, some distance away from the south geographic pole).
Array Spreading: described the potion impact of solar array If a suggested system consists of PV arrays with different azimuths and tilts.
Degradation: Potential induced degradation is a possible induced performance degradation in photovoltaic modules.
Derate Factors: PVWATTS multiplies the nameplate DC power rating by a general DC to AC Derate factor to calculate the AC power rating at STC. The overall DC to AC Derate factor accounts for drawdowns from the DC nameplate power rating and is the mathematical product of the Derate factors for the components of the PV system.
Insolation: Solar Insolation is the number of electromagnetic energy (solar radiation) incident on the surface of the earth. Basically, that means how much sun energy is shining down on us.
Solar: The expected monthly kWh generation of the proposed system is shown along with the estimated production of one or two solar arrays at roof tilt.
Annual kWh: This is the approximated annual energy output of the proposed system. This value is reported for the sole reason for transparency of the calculator which is not a guarantee of future system performance.
Incentive: This is the total incentive for the proposed system (Tax Credit & Potential Rebates).
EPBB: Expected Performance-Based Buy down
ITC: Solar Investment Tax Credit.
Internal Rate on Return (IRR): Internal rate of return (IRR) is the interest rate at which the net present value of all the cash flows (either positive and negative) from a project or investment same zero. Internal rate of return is used to evaluate the attractiveness of a project or investment.
Payback Period: The length of time necessary for an investment to recover its preliminary outlay in terms of profits or savings.
Return on Investment (ROI): ROI is given as a percentage and is typically used for personal financial decisions, to examine a company’s profitability or to compare the efficiency of different investments. The return on investment formula is: ROI = (Net Profit / Cost of Investment) x 100.
Total return: Total return includes interest, capital gains, dividends and distributions realized over a given period.
Tax Deduction: Tax deduction is a reduction of income that can be taxed.
Tax Saving: Tax savings means that you pay a reduced amount of taxes, either because an investment earnings.
APR: An annual percentage rate (APR) is the annual rate that is incurred for borrowing (or created by investing), expressed as a single percentage amount that provides the true yearly cost of funds over the term of a loan. This consists of every fees or additional costs linked to the transaction.
After Tax APR: The effective interest rate after their potential tax deductible of the financing is considered.
Moving Average definition: Moving average that is determined by adding the closing price of the surety for several time periods and then dividing this total by the number of time periods.
Capitalized Interest: The interest of a loan occurred before 1st payment.
Net metering: Net energy metering, or “NEM”, is a special billing agreement that provides credit to customers with solar PV systems for the full retail value of the electricity their system generates.
Escalation Rate: The Energy Escalation Rate Calculator (EERC) computes an average annual escalation rate for a specified period, that can be used as an escalation rate for contract payments in energy power savings performance contracts.
Nominal Values: Nominal is an unadjusted rate and does not create adjustments to reflect factors such as seasonality or inflation.
Schedule: Customer classification associated with the Utility.
Baseline Allocation: Baseline Allocation is a set amount of kilowatt hours of energy (kWh) for basic services. Your specific Baseline Allocation is determined by three factors: your baseline region, the season (winter or summer), and whether your home’s source of energy is electricity only.
High Season: These are the months that define the summer period. Is used to determine changes of utility cost at summer time.
Low Season: These are the months that define the winter period. Is used to determine changes of utility cost at winter time.
Basic Charge: the costs associated with providing essential services, such as billing, equipment installation and maintenance, and meter reading.
DWR Bond: Bonds issued by the Department of Water Resources (DWR) to cover the cost of buying power for customers during the energy crisis are being repaid through a portion of your electric bill.
Property Assessed Clean Energy (PACE) is a way of financing energy efficiency improvements or renewables installations for home, business or industrial property owners. Depending on state legislation, PACE may be used to finance efficiency products such as solar systems. Some of the known programs in California are the Hero Program, California First, Ygrene.
A tax credit is a dollar-for-dollar reduction in the total income tax you may otherwise owe. Tax Credit option may be available for purchasing PV solar system excluded leasing. To apply for Federal Tax Credit (ITC) use Form 5695, Residential Energy Credits. For more information check this link: HOMEOWNER’S GUIDE TOTHE FEDERAL INVESTMENT TAX CREDITFOR SOLAR PV.
Property Assessed Clean Energy (PACE) is a means of financing energy efficiency upgrades or renewable energy installations for residential, commercial and industrial property owners. It is depending on state legislation, PACE can be used to finance water efficiency products, seismic retrofits, and hurricane preparedness measures. Source: https://en.wikipedia.org/wiki/PACE_financing
This is common question and frequent web review complains. Unfortunately, there is big confusion and misleading by non-professional solar installers in the market. PV solar system is a financial investment and not a home improvement products. Without a designated PV solar system software, it is almost impossible to analyze your benefits of having solar.
Property Tax Exclusion for Solar Energy Systems installation. Section 73 of the California Revenue and Taxation Code allows a property tax exclusion for certain types of solar energy systems installed between January 1, 1999, and December 31, 2024. Source: Database of State Incentives for Renewables & Efficiency (DESIRE). For more information check Guidelines for Active Solar Energy Systems New Construction Exclusion at California State Board of equalization.
Typical Net Metering (NEM 1.0) consider full credit on exported energy from your solar system to the grid. By getting into the NEM 2.0 you get less than the full retail price of energy by the utility. Per the California Public Utilities Commission (CPUC), the current Net Energy Metering 1.0 programs will be closed to new customers on July 1, 2017 or earlier.
Here is where things get complicate, the new NEM-2 discount solar energy exports by the amount of Non-Bypassable charges (NBC’s) for a specific rate schedule. The NBC’s charges are the utility costs of programs low-income assistance customers, energy efficiency, and nuclear decommissioning of shut down plants, etc. As for today, should not pay for non-By-passable charges by the end of the 12 months NEM cycle. The discount is calculated by multiplying the energy (kWh) exports by the price difference of the “retail and export rate of the utility.
(Standard Test Conditions – STC, Performance Test Conditions – PTC, California Energy Commission – CEC)
(Solar system will lose partial of the production capability during the years. Normally they will lose up to 3% within the first two years, and 0.4% to 1% every year. Make sure your PV solar installer took it into consideration in your saving analysis.
Azimuth and Roof Tilt (Slope) can affect your system production up to 40% from suggested System Size in kWh-DC
A typical meteorological year (TMY) is a collation of selected weather data for a specific location, generated from a data bank much longer than a year in duration and it’s the official method used by National Renewable Energy Laboratory -NREL. Make sure your solar installer does the right PV solar system performance based on the closet meteorology station to your property.
No, your utility provider may charge some fixed monthly fee like “Minimum Monthly Charge” and/or “Basic Charge”. Make sure your solar installer provides you transparent saving analysis.
Different utilities have different rates, the average US nominal escalation rate in the last 30 YRs was 4%.
(Your Baseline Region is defining the amount of kWh usage in each Utility Tiers and might change between seasons. It is significantly effective on your potential saving analysis)
No, for more information, check IRS Publication 17, section 22 & IRS Rev Rul. 79-201